# Limestone Calculator

URL: https://speedycalculator.com/calculators/construction/limestone/
Last updated: 2026-10-25

> The limestone calculator works out how much limestone you need from the area and depth, in cubic yards, cubic metres, tons and tonnes, and estimates the cost from a price per ton or per cubic yard.

## Inputs

- Material
- Custom density (kg/m³, lb/ft³, g/cm³, lb/yd³)
- Area shape
- Length (or diameter) (ft, m, in, yd, cm)
- Width (ft, m, in, yd, cm)
- Depth (in, cm, mm, ft, m)
- Extra for waste and compaction (%)
- Priced by
- Price per weight (/US ton, /t, /lb, /kg)
- Price per volume (/yd³, /m³, /ft³)

## Results

- Area
- Volume needed
- Weight needed
- Estimated cost

## Formula

```
Volume = area × depth × (1 + waste)
Weight = volume × density
Cost = weight × price per ton (or volume × price per yd³)
```

## Explanation

Crushed limestone is one of the most widely used aggregates for driveways, road base, paver beds and drainage. It compacts well because its angular faces lock together, and limestone screenings packed under pavers form a firm, level bed. Solid limestone blocks are much denser than the crushed stone, so choose the form you are buying from the list.

### How to use the Limestone Calculator

- **Material**
- **Custom density**
- **Area shape**
- **Length (or diameter)**
- **Width**
- **Depth**
- **Extra for waste and compaction**
- **Priced by**
- **Price per weight**
- **Price per volume**
- Every result field is editable: type into **Volume needed** or any other result and **Depth** plus every other field update to match.

Results update as you type, and every field accepts the units shown in its menu.

### How it works

The calculator finds the area of your rectangle, circle or triangle, multiplies it by the depth and adds the waste allowance to get the volume. Multiplying by the density of the chosen material gives the weight, and the price you enter turns either one into a cost.

### Densities used

Materialkg/m³lb/ft³US tons per yd³Limestone, crushed1,55497.01.31Limestone, loose1,55096.81.31Limestone, low density1,760109.91.48Limestone, medium density2,290143.01.93Limestone, high density2,710169.22.28Limestone, solid2,611163.02.20

### Good to know

A U.S. (short) ton is 2,000 lb; a metric tonne is 1,000 kg (2,204.6 lb). Quarries in the U.S. sell by the short ton, so check which one your quote uses.

### Tips for an accurate estimate

- Sketch the job and split irregular areas into rectangles, circles and triangles before you measure.
- Add a waste allowance – typically 5–10% for simple layouts and 15–20% for diagonal, curved or heavily cut work.
- Check the coverage or yield printed on the product, because sizes and densities vary between manufacturers.
- Buy all units of a finished material (tile, brick, siding) from the same batch so colours match, and keep a few spares for repairs.
- Confirm local prices – quarry, lumber and steel prices vary widely by region and season.

### Common mistakes to avoid

- Ordering exactly the calculated amount with no allowance for breakage, offcuts and settlement.
- Forgetting to subtract doors, windows and other openings – or subtracting small ones that still need cutting around.
- Confusing US short tons (2,000 lb) with metric tonnes (1,000 kg) when comparing quotes.

### Inputs explained

FieldWhat to enterMaterialChoose one: Limestone, crushed, Limestone, loose, Limestone, low density, Limestone, medium density …Custom densityUnits: kg/m³, lb/ft³, g/cm³, lb/yd³Area shapeChoose one: Rectangle / square, Circle (length = diameter), Triangle (length = base, width = height)Length (or diameter)Units: ft, m, in, yd, cmWidthUnits: ft, m, in, yd, cmDepthUnits: in, cm, mm, ft, mExtra for waste and compactionIn %Priced byChoose one: Weight (per ton / tonne), Volume (per yd³ / m³)Price per weightUnits: /US ton, /t, /lb, /kgPrice per volumeUnits: /yd³, /m³, /ft³

## Worked example

Inputs — Material: Limestone, crushed; Custom density: 1,600 kg/m³; Area shape: Rectangle / square; Length (or diameter): 20 ft; Width: 10 ft; Depth: 4 in; Extra for waste and compaction: 10 %; Priced by: Weight (per ton / tonne); Price per weight: $45 /US ton; Price per volume: $60 /yd³.

Results — Area = 200 ft²; **Volume needed = 2.716 yd³**; Weight needed = 3.557 US ton; Estimated cost = $160.07.

## FAQ

**How much does a yard of crushed limestone weigh?**
About 2,600–2,800 lb (1.3–1.4 US tons) per cubic yard loose.

**How thick should a limestone driveway be?**
Typically 4–6 in of #57 or #411 limestone over a compacted base of larger stone.

**What is limestone screening used for?**
Fine screenings (dust to ⅛ in) compact into a hard, smooth surface for paths and paver bedding.

**What formula does the Limestone Calculator use?**
Volume = area × depth × (1 + waste).


## Sources

- [The Engineering ToolBox – Bulk densities of materials](https://www.engineeringtoolbox.com/density-materials-d_1652.html)