Rolling Offset Calculator

Quick answer

The rolling offset calculator finds the true offset, travel (centre-to-centre pipe length) and run for a pipe that changes both height and side position, for 11¼°, 22½°, 45° and 60° fittings.

True offset
14.422
Travel (centre to centre)
20.396
Travel (fraction)
20 3/8 in
Run (setback)
14.422
Travel multiplier
1.4142

A rolling offset moves a pipe up or down and sideways at the same time. Plumbers and pipe fitters solve it by combining the vertical rise and horizontal roll into a single “true offset”, the hypotenuse of the two, then treating it like a simple offset with the fitting angle. For 45° fittings the travel is 1.414 times the true offset.

How to use the Rolling Offset Calculator

  1. Vertical offset (rise)
  2. Horizontal offset (roll)
  3. Fitting angle

Results update as you type, and every field accepts the units shown in its menu.

How it works

Enter the vertical rise, the horizontal roll and the fitting angle. The calculator combines rise and roll into the true offset, then uses the angle to find the travel and the run the offset takes up along the pipe line.

Offset multipliers

Fitting Travel = offset × Run = offset ×
11.25° 5.126 5.027
22.5° 2.613 2.414
30° 2.000 1.732
45° 1.414 1.000
60° 1.155 0.577
72° 1.051 0.325

Inputs explained

Field What to enter
Vertical offset (rise) Units: in, cm, mm, ft, m
Horizontal offset (roll) Units: in, cm, mm, ft, m
Fitting angle Choose one: 45°, 22½°, 11¼°, 60° …

What each result means

  • True offset = sqrt([Vertical offset (rise)]^2 + [Horizontal offset (roll)]^2)
  • Travel (centre to centre) = [True offset]÷sin(rad([Fitting angle]))
  • Travel (fraction) = [Travel (centre to centre)]
  • Run (setback) = [True offset]÷tan(rad([Fitting angle]))
  • Travel multiplier = 1÷sin(rad([Fitting angle]))

Formula

True offset = √(rise² + roll²) Travel = true offset ÷ sin(fitting angle) Run (setback) = true offset ÷ tan(fitting angle)

Worked example

Inputs: Vertical offset (rise): 12 in; Horizontal offset (roll): 8 in; Fitting angle: 45°.
Results: True offset = 14.422 in; Travel (centre to centre) = 20.396 in; Travel (fraction) = 20 3/8; Run (setback) = 14.422 in; Travel multiplier = 1.4142.

Frequently asked questions

What is the 45° offset multiplier?

1.414. Multiply the true offset by 1.414 to get the travel.

What are the other multipliers?

22½°: 2.613, 11¼°: 5.126, 60°: 1.155, 30°: 2.000.

How do I measure the travel?

It is centre-to-centre between fittings; subtract fitting take-offs to get the cut length of pipe.

Cite this calculator

Speedy Calculator. (2026). Rolling Offset Calculator. Speedy Calculator. https://speedycalculator.com/calculators/construction/rolling-offset/