The sagitta (from the Latin for arrow) is the depth of an arc measured at the middle of its chord. It is used to lay out curved walls, arches and bent trim, to check lens and mirror curvature and to find the radius of a curve you can only measure across. Carpenters often know the chord and the rise and need the radius to swing an arc.
How to use the SAG Calculator
- Radius
- Chord length
- Every result field is editable: type into Sagitta (sag) and Radius plus every other field update to match.
Results update as you type, and every field accepts the units shown in its menu.
How it works
Enter the radius and the chord length. The calculator returns the sag, the length along the arc and the angle the arc subtends. Type a sag value to work backwards to the radius.
Inputs explained
| Field | What to enter |
|---|---|
| Radius | Units: ft, m, in, yd, cm |
| Chord length | Units: ft, m, in, yd, cm |
What each result means
- Sagitta (sag) = [Radius] – sqrt([Radius]^2 – ([Chord length]÷2)^2)
- Arc length = 2×[Radius]×asin([Chord length]÷(2×[Radius]))
- Central angle = deg(2×asin([Chord length]÷(2×[Radius])))
Example values
How the main result changes when Radius changes and everything else stays at the example values above:
| Radius (ft) | Sagitta (sag) (in) |
|---|---|
| 5 | 24 |
| 7.5 | 13.869 |
| 10 | 10.018 |
| 12.5 | 7.887 |
| 15 | 6.518 |
| 20 | 4.849 |
Formula
s = R − √(R² − (c/2)²)
Arc length = 2R × asin(c ÷ 2R)
Central angle = 2 × asin(c ÷ 2R)
Worked example
Inputs: Radius: 10 ft; Chord length: 8 ft.
Results: Sagitta (sag) = 10.018 in; Arc length = 8.23 ft; Central angle = 47.16 °.
Key terms
- Chord
- A straight line joining two points on a circle.
Frequently asked questions
How do I find the radius from the sag?
R = s/2 + c²/(8s), with s the sag and c the chord.
What happens if the chord is longer than the diameter?
It is impossible, since a chord can be at most 2R, so the result is undefined.
Where is the sagitta used?
Arches, curved walls, lens design (sag of a surface), road and rail curves and woodworking templates.